✅ASTM-Based Soil Test Calculations
✅ Automatic Report Generation
✅ USCS & AASHTO Classification
✅ Borehole & Sample Management
✅ Professional Graphs & Charts
✅ PDF, Word & Excel Export
Dartis Soil Lab is professional geotechnical laboratory software developed for processing soil mechanics laboratory tests, managing borehole sample data, and generating detailed engineering reports automatically.
The software simplifies repetitive laboratory calculations and reporting workflows for geotechnical engineers, laboratories, consultants, and academic institutions
Managing soil laboratory data manually using spreadsheets and disconnected report templates is time-consuming and error-prone.
Dartis Soil Lab provides an integrated workflow for entering laboratory test data, performing calculations automatically, generating reports, and organizing geotechnical laboratory projects efficiently.
Dartis Soil Lab supports a wide range of laboratory tests commonly used in geotechnical engineering and soil mechanics laboratories.
The software automatically performs calculations and generates engineering-ready reports for each test.
Dartis Soil Lab supports commonly used ASTM standards for soil mechanics laboratory testing.
This standards-based workflow improves reliability and consistency in laboratory reporting.
Dartis Soil Lab automatically determines engineering soil classifications based on entered laboratory test results.
The software combines sieve analysis, hydrometer, and Atterberg limit data for efficient soil classification and reporting.
The software includes integrated borehole and sample management tools for organizing laboratory projects.
This workflow reduces data duplication and improves laboratory organization.
Dartis Soil Lab generates professional reports and graphs immediately after data entry.
The software helps laboratories standardize report presentation and reduce preparation time.
ASTM Standard: D-422
This is the most common soil test in a soil mechanics laboratory. Dartis Soil Lab covers all sieve sizes with the ability to add custom sieves. You have full control over sieve sets. You can also enter hydrometer test data.
Soil classification will be presented for both Unified Soil Classification System (USCS) and AASHTO classification system. When it comes to reporting, you can choose between four designed and ready templates.
ASTM Standard: D-4318
Easily process Liquid Limit (LL) and Plastic Limit (PL) tests! Enter any number of test data in Dartis Soil Lab and LL / PL and PI will be calculated automatically.
ASTM Standard: D-854 , C-127
In soil mechanics, the specific gravity of soil solids (which is often referred to as the specific gravity of soil) is an important parameter for calculating the weight–volume relationship.
ASTM Standard: D-3080
This test is used to measure the internal friction angle and cohesion of soils.
ASTM Standard: D-2166
The unconfined compression strength is determined by applying an axial stress to a cylindrical soil specimen with no confining pressure and observing the axial strains corresponding to various stress levels. The stress at which failure in the soil specimen occurs is referred to as the unconfined compression strengt.
ASTM Standard: D-698, D-1557
Dartis Soil Lab covers both Standard and Modified ASTM test methods. Moisture-density curve for various specific gravity (Gs) values, optimum moisture content and maximum dry density are calculated and presented in the compaction test report.
ASTM Standard: D-2435
Dartis Soil Lab accepts unlimited number of vertical loads for 1D consolidation test. The software provides pre-consolidation stress (Pc), compression index (Cc), re-compression index (Cs), t(50), t(90) and Cv.
|
Feature
|
Excel Sheets
|
Dartis Soil Lab
|
|---|---|---|
|
ASTM-based workflows
|
Limited
|
✔
|
|
Automatic calculations
|
Partial
|
✔
|
|
Soil classification
|
Manual
|
✔
|
|
Borehole management
|
✖
|
✔
|
|
Engineering graphs
|
Manual
|
✔
|
|
Professional reports
|
Limited
|
✔
|
|
Multiple soil tests
|
Difficult
|
✔
|
The software supports sieve analysis, hydrometer, Atterberg limits, direct shear, compaction, permeability, consolidation, moisture content, and several other common soil mechanics laboratory tests.
Yes. Dartis Soil Lab is designed around commonly used ASTM standards for geotechnical laboratory testing.
Yes. Reports, graphs, and summary tables can be generated automatically and exported to PDF, Word, and Excel formats.
Yes. Both USCS and AASHTO soil classifications are calculated automatically using laboratory test data.
